Skip to content
Topos Uranos

Summary

This lesson is the opening unit of the course and sets out its complete syllabus. It states the purpose of the course, the people for whom it is intended, what it brings from Calculus I and from Algebra and Geometry and the courses to which it leads; it states the seven global learning objectives the course pursues; it describes the seven content units and the lessons that make them up; it estimates the workload the course requires, its distribution by unit, a suggested pace of study and its credits; it explains how its lessons are built and how their assessment is conceived, and, finally, it gives advice on how to study it.

Learning objectives

  1. Describe the sequence of units of the course and explain what each one contributes to the later ones and what it takes from Calculus I and from Algebra and Geometry I and II.
  2. State the global learning objectives of the course and recognize which units and lessons contribute to each of them.
  3. Calculate, from the estimated hours per unit, the workload required by the course or by a portion of it, and use it to plan a personal pace of study.
  4. Explain the structure of a lesson on the site and the use that should be made of its examples, problems, challenges and unit assessments.

Purpose and intended students

Of the three ancient problems that led to calculus, the velocity of a moving body, the tangent to a curve and the area of a curved figure, Calculus I solved the first two with the derivative. This course deals with the third. The area of a curved figure cannot be computed by adding a finite number of straight pieces: it is approximated by ever finer sums of rectangles, and the value sought is what those sums approach. For the idea to be exact, two things are needed that Calculus I did not have: a definition of the integral by sums and a theory of sequences, which says when an endless approximation has a limit. With them come sums of infinitely many terms, series, and with series, the representation of a function by an endless polynomial, the Taylor series.

Its purpose is to build the integral calculus of functions of one real variable on the completeness axiom and the definition of the integral by sums, and to deduce from them, with complete proofs, how antiderivatives are found and integrals are computed, which magnitudes they measure, when improper integrals and series converge, and how a function is approximated by its Taylor polynomials and represented by a power series. If this is so, the course is not a repertoire of techniques for computing integrals, but a deductive edifice: every result that is used is stated and proved in an earlier lesson or in the same one. What cannot be proved with these means is said expressly and nothing depends on it: that certain functions, such as e−x2e^{-x^2}, have no elementary antiderivative, that the differential binomials outside Chebyshev’s three cases have none either, and the characterization of integrable functions by their discontinuities are mentioned as facts that are proved in later courses. The course, on the other hand, closes a fact that Algebra and Geometry admitted: the fundamental theorem of algebra, on which the partial fraction decomposition depends, is proved in unit 2, so that the integration of rational functions is proved from beginning to end.

It is intended for whoever has completed Calculus I, or masters its contents by another route: university students of science, engineering, economics or mathematics teacher education who are taking their second semester of calculus, and whoever wishes to rebuild with rigor an integral calculus they learned as a set of formulas.

Prior knowledge and prerequisites

The prerequisite of the course is Calculus I, which in turn presupposes Algebra and Geometry I and Algebra and Geometry II. From Calculus I, the course uses everything: the definition of the limit with epsilon and delta and its algebra, continuity and the completeness axiom, the theorems of Bolzano and of Weierstrass, the differentiation rules, the mean value theorems of Lagrange and of Cauchy, the corollary according to which two functions with the same derivative on an interval differ by a constant, L’Hôpital’s rule, the curvature of a graph and the Newton-Raphson method. Many of its promises are fulfilled here: the integral as a limit of sums of rectangles, antiderivatives, uniform continuity, the Taylor polynomial, the bound on the error of the differential and the speed with which the Newton-Raphson method converges.

From Algebra and Geometry I, the course uses above all sums and progressions, induction and the binomial theorem, the number ee and the natural exponential, the hyperbolic functions, complex numbers and partial fractions; from Algebra and Geometry II, the trigonometric identities, polar coordinates, the polar form of complex numbers and the complex exponential and Euler’s formula, which the last content lesson of the course obtains as the sum of a series.

Whoever doubts any of this knowledge can go back to the synthesis of the corresponding unit of Calculus I or of Algebra and Geometry; in addition, the entry assessment of each unit includes questions on what the unit takes as known, with the lesson worth reviewing after each error.

Where it leads

One course has this one as a prerequisite: Calculus III: Multivariable Calculus. It will define double and triple integrals as this course does, with sums over partitions of a rectangle or of a box, and will compute them as iterated integrals, each with an antiderivative in a single variable; it will carry the Bolzano-Weierstrass theorem over to sequences of points of the plane and of space, with the same argument; it will define the length and the curvature of space curves as here, with one more coordinate, and the area of a surface, which this course leaves out; and it will carry the Taylor polynomial over to functions of several variables. From this follows what this course leaves, by express decision, to the courses that come after it: to Calculus III, parametric curves in general, the implicit function theorem and functions of several variables; and outside this course, differential equations.

The results of the course will also reappear in courses that do not require it. Mechanics I: Foundations of Mechanics, which will rely on it, will take position as an antiderivative of velocity, displacement and the work of a variable force as integrals, and escape velocity from the convergence of an improper integral. In Financial Mathematics I, the present value of a continuous flow of payments will be an integral, and that of a perpetuity, the sum of a geometric series. In Data Analysis with R, the probability of an interval will be the area under a density, a density defined on the whole line will have to have an improper integral equal to 11, and the Gaussian integral will fix the constant of the normal distribution. In Programming in C++ I, bisection produces a sequence of nested intervals; this course explains why it converges and, with its error bounds, how many iterations, terms of a series or subintervals of a numerical integration rule suffice in a program for a given precision.

Global learning objectives

The objectives below describe what anyone who completes the course should be able to do. Each one is formulated as an observable performance, so that it can be checked with a concrete task; each lesson declares, in turn, its own objectives, and the closing lesson shows, lesson by lesson, to which of these seven each one was assigned. The objectives are numbered so that they can be cited there.

  1. Objective 1. Prove the statements of integral calculus by explicit deductive reasoning: write as quantified statements the definitions of the limit of a sequence, of integrability and of uniform convergence, and negate them; deduce from the completeness axiom the existence theorems, such as monotone convergence, the Bolzano-Weierstrass theorem, the Cauchy criterion and the integrability of continuous functions; show with counterexamples that a hypothesis cannot be omitted; and distinguish in each result what is defined, what is proved and what is mentioned as a fact from later courses.
  2. Objective 2. Find antiderivatives with the theorems of change of variable, of integration by parts and of change of variable by the inverse function, with trigonometric and hyperbolic substitutions, partial fraction decomposition and rationalizations, indicating the interval on which each one is valid, and compute definite and improper integrals whose integrand has no elementary antiderivative with symmetries, the Wallis integrals, differentiation with respect to a parameter, the Gaussian integral and the gamma function.
  3. Objective 3. Compute limits of sequences and decide their convergence with the definition, monotone convergence, subsequences and the Cauchy criterion, study recursively defined sequences and the iteration of a contraction, prove from the completeness axiom the theorems of Bolzano-Weierstrass and of Heine-Cantor and the fundamental theorem of algebra, and use the sequential characterization of the limit and of continuity.
  4. Objective 4. Define the Riemann integral with Darboux sums, prove the integrability criterion and the integrability of monotone and of continuous functions, deduce the properties of the integral and the mean value theorems for integrals, prove the fundamental theorem of calculus and Barrow’s rule, and compute with them integrals and limits of Riemann sums.
  5. Objective 5. Decide the convergence of improper integrals and of numerical series with the Cauchy criterion and the comparison, integral, root and ratio tests, the finer tests of Kummer, Raabe and Gauss, and those of Leibniz, Dirichlet and Abel, distinguish absolute from conditional convergence and recognize which operations preserve a sum, distinguish pointwise from uniform convergence in sequences and series of functions and in integrals with a parameter, and find the radius and the interval of convergence of a power series.
  6. Objective 6. Approximate functions with the Taylor polynomial and represent them by their Taylor series, and approximate integrals, sums of series, roots and constants with the midpoint, trapezoidal and Simpson’s rules, the Taylor remainders and the remainders of series, the iteration of a contraction and Stirling’s formula, bounding the error in each case and choosing the order, the number of terms or the number of subintervals that guarantee a given precision.
  7. Objective 7. Set up with the integral the measurement of geometric magnitudes, such as the area between graphs, in polar coordinates and of unbounded regions, the volume by cross-sections and that of solids of revolution, arc length, curvature and the average value of a function, starting from the requirements that every measure must satisfy and distinguishing what is defined from what is proved, and communicate in writing setups, computations and proofs with correct notation, complete argumentation and a check on the plausibility of the results.

Objectives 2, 3 and 4 correspond, essentially, to the first three content units: objective 2 to unit 1, which studies antiderivatives; objective 3 to unit 2, which studies sequences; objective 4 to unit 3, which defines the integral. Objective 7, as regards measurement, corresponds to unit 4; objective 5 brings together units 5 and 6 and the lessons of unit 7 on series of functions and power series; objective 6, the lessons on the Taylor polynomial and the Taylor series and the one on numerical integration. Several are, moreover, threads that run through the course. The techniques of objective 2 return in unit 3, with symmetries and the Wallis integrals, and in unit 5, with differentiation under the integral sign, the Gaussian integral and the gamma function; that is why those three lessons have objective 2 as their main objective, although they belong to other units. The completeness of objective 3 underpins the integrability of continuous functions, the Cauchy criteria for integrals and for series and the radius of convergence of a power series. Approximation with an error bound, from objective 6, appears in units 2 to 7: in the number ee and in contractions, in the Wallis integrals, in numerical integration, in Stirling’s formula, in the remainders of series and in the Taylor polynomial. The first and the seventh, on the other hand, are transversal: they do not belong to one unit, but are exercised in all of them. It follows that their achievement cannot be attributed to any particular lesson, and that it is advisable to cultivate them throughout the whole course. Now, both also have lessons that serve them in a principal way: the first, the seven syntheses, whose core reconstructs the deductive chain of each unit; the seventh, the lessons of unit 4 in which setting up a measure is the very subject matter. The applications of the course are geometric and numerical; those of physics will be studied in the mechanics courses.

Contents

The course is organized in nine units. The first and the last frame the journey; the seven intermediate ones develop the contents. Each of these opens with an introduction lesson, which presents its lessons, the historical background of its ideas, the problem that gave rise to them and their relevance, and closes with a synthesis lesson, which reconstructs the deductive chain of the unit, connects it with the rest of the course, with Calculus I and with Algebra and Geometry, and proposes ten challenges of greater difficulty than the problems of the lessons. The order of the units responds to a decision: the indefinite integral, which needs only derivatives, comes before the definite one, and between the two comes the unit on sequences that the definite integral needs; series, which use the integral in one of their tests, take up sequences again at the end of the course.

Unit 0. Course overview

It consists of this lesson, which sets out the purpose, the global objectives, the contents, the workload and the design of the course.

Unit 1. Antiderivatives and integration techniques

Its objective is to define the antiderivative and the indefinite integral, to prove that two antiderivatives on an interval differ by a constant, and to prove, by running the differentiation rules backward, the theorems of change of variable and of integration by parts; to find with them the antiderivatives of the trigonometric functions, of the square roots of polynomials of degree two and of the rational functions, whose partial fraction decomposition is proved with Bézout’s identity, and to rationalize the integrands that allow it, always indicating the interval on which each antiderivative is valid.

  1. Antiderivatives and integration techniques: introduction.
  2. Antiderivatives and the indefinite integral.
  3. Integration by change of variable.
  4. Integration by parts.
  5. Trigonometric integrals.
  6. Trigonometric and hyperbolic substitutions.
  7. Integration of rational functions.
  8. Integration by rationalization.
  9. Antiderivatives and integration: synthesis and challenges.

Unit 2. Sequences

Its objective is to define the limit of a sequence and to inherit for it the limit theorems of Calculus I; to deduce from the completeness axiom the convergence of monotone bounded sequences, the Bolzano-Weierstrass theorem, with which the fundamental theorem of algebra is proved, and the Cauchy criterion; to study recurrences and the fixed-point theorem for contractions, with their error bounds, and to prove with sequences the Heine-Cantor theorem on uniform continuity, which the following unit needs.

  1. Sequences: introduction.
  2. Sequences and their limit.
  3. Monotonic sequences and the number ee.
  4. Subsequences, Bolzano-Weierstrass, limit superior and inferior.
  5. Cauchy sequences.
  6. Sequences, functions and uniform continuity.
  7. Sequences: synthesis and challenges.

Unit 3. The definite integral

Its objective is to define the Riemann integral with Darboux sums, to prove the integrability criterion and the integrability of monotone and of continuous functions, to deduce the properties of the integral and the mean value theorems for integrals, to prove the fundamental theorem of calculus and Barrow’s rule, which join the definite integral to the indefinite one, and to compute definite integrals with symmetries, with the orthogonality relations and with the Wallis integrals.

  1. The definite integral: introduction.
  2. The area problem.
  3. The Riemann integral.
  4. Integrable functions.
  5. Properties of the definite integral.
  6. The fundamental theorem of calculus.
  7. Techniques for definite integrals.
  8. The definite integral: synthesis and challenges.

Unit 4. Applications of the integral

Its objective is to define with the integral, starting from the requirements that every measure must satisfy, the area between graphs and in polar coordinates, the volume of solids by cross-sections and that of solids of revolution, and the average value of a function; to define the length of a curve as a supremum, and its curvature, proving the formulas for each; and to approximate the integrals that cannot be computed with the midpoint, trapezoidal and Simpson’s rules, with a guaranteed error bound.

  1. Applications of the integral: introduction.
  2. Areas and the average value of a function.
  3. Volumes of solids.
  4. Arc length and curvature.
  5. Numerical integration.
  6. Applications of the integral: synthesis and challenges.

Unit 5. Improper integrals

Its objective is to extend the integral to unbounded intervals and to unbounded functions as a limit, to decide its convergence with the Cauchy criterion and the comparison test, to distinguish absolute from conditional convergence with Dirichlet’s and Abel’s tests, to differentiate under the integral sign with uniform convergence, and to compute with all this the Gaussian integral, the gamma function and Stirling’s formula.

  1. Improper integrals: introduction.
  2. Improper integrals and convergence tests.
  3. Conditional convergence of improper integrals.
  4. Differentiation under the integral sign.
  5. The Gaussian integral, the gamma function and Stirling’s formula.
  6. Improper integrals: synthesis and challenges.

Unit 6. Numerical series

Its objective is to define the sum of a series as the limit of its partial sums, to prove the convergence tests, from comparison, the integral, the root and the ratio to the finer tests of Kummer, Raabe, Gauss and Ermakov and those of Leibniz, Dirichlet and Abel for series whose terms vary in sign, to distinguish absolute from conditional convergence and to prove which operations preserve the sum of a series: grouping, rearranging and multiplying.

  1. Numerical series: introduction.
  2. Numerical series and their convergence.
  3. Series with positive terms.
  4. Ratio and root tests.
  5. Finer convergence tests.
  6. Alternating series and conditional convergence.
  7. Absolute convergence, rearrangements and products of series.
  8. Numerical series: synthesis and challenges.

Unit 7. Taylor polynomials and power series

Its objective is to prove Taylor’s formula with the remainders of Peano, of Lagrange, of Cauchy and in integral form, and to bound with it the error of an approximation and the speed of the Newton-Raphson method; to distinguish pointwise from uniform convergence in sequences and series of functions; to study power series, their radius of convergence and their term-by-term differentiation and integration; to represent the elementary functions by their Taylor series, and to compute with series integrals and notable constants, up to the irrationality of π\pi and Euler’s formula.

  1. Taylor polynomials and power series: introduction.
  2. The Taylor polynomial.
  3. The Taylor remainder and its applications.
  4. Sequences and series of functions.
  5. Power series.
  6. Taylor series of the elementary functions.
  7. Series, integrals and notable constants.
  8. Taylor polynomials and power series: synthesis and challenges.

Unit 8. Course closing

It consists of the lesson Final review of Calculus II, which recalls the seven global objectives, shows in a figure to which of them each lesson of the course was assigned and which specific objectives each unit achieved, and gathers by objective the first attempt at the exit assessments.

Workload and credits

The workload of a course is not measured by hours of lecturing, which do not exist in an asynchronous course, but by the total work of the person studying it: reading, following the proofs, solving problems and reviewing. The estimate follows the same method in all the courses of the site: it counts the reading time of the text of each lesson at one hundred words per minute, counting each formula as one word, twenty minutes per solved problem, thirty-five per proposed problem, forty-five per challenge and twelve per entry or exit assessment, and adds a margin of one tenth for review.

Results

Taken together, the lessons of units 1 to 7 contain 190190 solved problems, 190190 proposed problems and 7070 challenges, as well as fourteen unit assessments. The estimated workload per unit, rounded to the hour, is as follows:

  • Unit 0, course overview: 11 hour.
  • Unit 1, antiderivatives and integration techniques: 5050 hours.
  • Unit 2, sequences: 4040 hours.
  • Unit 3, the definite integral: 4646 hours.
  • Unit 4, applications of the integral: 3434 hours.
  • Unit 5, improper integrals: 3535 hours.
  • Unit 6, numerical series: 4747 hours.
  • Unit 7, Taylor polynomials and power series: 4848 hours.
  • Unit 8, course closing: less than 11 hour.

The seven content units have similar loads, between about 3434 and about 5050 hours: unit 1 gathers more lessons; units 4 and 5, fewer; and units 6 and 7, longer lessons. The total is about 302302 hours of work. This figure should be read for what it is: an estimate for someone who studies all the proofs and solves all the problems and challenges. Whoever has already studied integral calculus, or restricts themselves to the proposed problems without tackling the challenges, will need considerably less; whoever studies the subject for the first time may need more, above all in units 2 and 3, where completeness and Darboux sums demand a new kind of argument.

Now, the figure is nominal: it is the one that sets the credits of the course, and it assumes reading at a constant pace and three quarters of an hour per challenge. Until it is measured with real students, it should be accompanied by a realistic range. If reading proceeded at half the assumed pace, as happens when each proof is rewritten with pencil and paper, and each challenge required seventy-five minutes instead of forty-five, the same method would give about 390390 hours. Therefore, the workload to be expected lies between about 302302 and about 390390 hours. The upper end is a prudent bound, not a measurement; the range will be corrected once the time spent by those who study the course is known, and until then the credits are calculated with the nominal figure.

Suggested pace

To name the paces, this plan uses the same criterion as the other plans of the site: full-time study is that of an academic year of 6060 credits, about 16501650 hours spread over some forty weeks, that is, about 4040 hours a week, and half-time is half of that, about 2020 hours a week. Calculus II is more extensive than Calculus I: in a sixteen-week semester it would demand about 1919 hours a week, practically half-time, and about 2424 with the realistic range, somewhat more. From this follows a recommended pace of twenty-four weeks, a semester and a half, with about 1313 hours of study a week, or about 1616 with the realistic range, below half-time; thus the course can be studied alongside another.

Anyone who can devote the full half-time to it will finish it in a sixteen-week semester, which is equivalent to the workload of someone who is taking no other demanding course in the same period. A more relaxed pace, of about 99 hours a week, spreads it over two semesters, which can be divided as follows: units 0 to 4, antiderivatives, sequences, the definite integral and its applications, take about 171171 hours, and units 5 to 8, improper integrals, series, the Taylor polynomial and the closing, about 131131.

Credits

The credits of this site measure the total workload that a course requires of the person studying it (reading, problems, challenges and review), not class hours. One credit is equivalent to about 27.527.5 hours of work, and a year of full-time study to 6060 credits, that is, to about 16501650 hours; this is the same criterion with which the preceding subsection names the paces of study.

Now, dividing the estimated 302302 hours by 27.527.5 gives 10.98, which is rounded to 1111. If a band of 2525 to 3030 hours of work is allowed for the credit, the number CC of credits of the course is bounded between 10.1 and 12.1:

(30230)≤C≤(30225)\left( \frac{302}{30} \right) \leq C \leq \left( \frac{302}{25} \right)

Therefore, the course has 1111 credits, somewhat more than one sixth of a year of full-time study. Anyone wishing to study only a portion of the course can use the list of hours per unit: units 0 to 4, for example, add up to about 171171 hours, that is, about 66 credits.

Their use is practical: they make it possible to compare the workload of the courses on the site with one another and to decide how many to study at the same time without exceeding the time available. Someone who can devote half-time study, for example, to a sixteen-week semester, that is, about 320320 hours, can take on courses adding up to about 1212 credits; with full-time study over the same semester, about 2323.

These credits are a measure specific to this site, for planning study: they do not correspond to any official credit system, nor do they entail academic recognition by any institution.

Course design

Mode of study

The course is asynchronous, online and self-paced: it has no dates, live sessions or deadlines, and each student advances at the speed that their preparation and their time allow. It will be offered in the fourteen languages of the site, with the same mathematics in all of them: the formulas and the steps of the proofs will be identical in each version, and only the text will be translated. Each lesson declares which lesson it is advisable to have studied beforehand, which is the preceding one in the course; this one, the first, refers to the last synthesis of Calculus I, so that the recommended order is explicit and can be verified.

The structure of a lesson

All topical lessons follow the same structure. They begin with a summary and a list of their own learning objectives, formulated as observable performances. Then comes the theory, with the definitions, the theorems stated precisely and their proofs, and the examples. The proofs and the examples are presented as step-by-step players: each step writes one line of the reasoning, highlights the terms involved and, when it relies on an earlier result, goes back to it and highlights it as it is read, so that the memory of the reasoning stays in view; many are accompanied by a figure that changes with each step. The lesson closes with five solved problems, with their step-by-step solution, and five proposed problems, each with a folded hint and, after it, the final answer, so that the student can check their result without the path being revealed; some proposed problems, above all those that ask for a proof, add, folded after the answer, a worked solution, which should be opened only after writing one’s own.

The introduction and synthesis lessons have a structure of their own. The introduction presents the unit, its history, the problem that gave rise to it and its relevance; the synthesis reconstructs in a figure the deductive chain of the unit, with the results it reuses and the links it proves, connects it with the earlier units, with Calculus I and with Algebra and Geometry, and proposes ten challenges, each with a hint, a final answer and a folded worked solution, which combine several lessons and demand more invention than the proposed problems.

The voice reader

Every lesson can be listened to aloud with the site’s reader, which uses the device’s own voices: the text is read just as it is written and the formulas are pronounced in words, including the integral sign and its limits of integration. This makes it possible to review a lesson away from the screen, to follow a proof by listening to it while watching the step-by-step player, and to study with visual impairments.

Assessment

The course neither grades nor certifies: its assessment on the site is formative. The proposed problems make it possible to check the achievement of the objectives of each lesson, and the challenges, that of the objectives of each unit. Each of the seven content units also has an entry assessment in its introduction and an exit assessment in its synthesis, before the challenges: short self-assessments, corrected in the browser without grading. The entry assessment has from four to seven questions about the unit, one for each content lesson, plus four to six about what the unit takes as known from the earlier ones, from Calculus I or from Algebra and Geometry, and the exit assessment, from six to nine; both indicate which lesson to review after each error and are compared with each other to show progress. The final review gathers the first attempt at each exit assessment into a profile by global objective, which is stored, like them, only in the student’s browser. The validation of skills, with certification value, will be done later and outside this site, on another platform.

In addition, the following evidence of achievement is suggested for the global objectives, which each student can produce on their own:

  • Objective 1: write out, without consulting the lesson, the proof of a theorem of the course, such as that of the integrability of continuous functions or the Heine-Cantor theorem, and show with a counterexample that none of its hypotheses is superfluous.
  • Objective 2: find the antiderivative of a rational function of sine and cosine by two routes, indicate the interval on which each one is valid and join them into an antiderivative on the whole line.
  • Objective 3: prove that a recursively defined sequence converges, by monotone convergence or by the fixed-point theorem, and find its limit.
  • Objective 4: compute from the definition, with Darboux sums, the integral of a monotone function, and check the result with Barrow’s rule.
  • Objective 5: decide for which values of a parameter a series or an improper integral converges absolutely, converges conditionally or diverges, justifying the choice of each test.
  • Objective 6: compute a value of a function or an integral with no elementary antiderivative with an error less than a given bound, choosing beforehand the order of the Taylor polynomial or the number of subintervals of Simpson’s rule.
  • Objective 7: write the complete setup of the measurement of a solid or of a curve, with the requirements used, the resulting integral, its computation and a plausibility check, so that another person can follow it without additional explanations.

How to study this course

The course is designed to be studied in order. Each unit presupposes the earlier ones, Calculus I and the two Algebra and Geometry courses, and many proofs cite results from earlier lessons; skipping a lesson forces one, sooner or later, to go back to it. This holds above all for unit 2: the Bolzano-Weierstrass theorem, the Cauchy criterion and the Heine-Cantor theorem underpin the integrability of continuous functions, the convergence tests for improper integrals and for series and the radius of convergence of power series.

Each unit has two checkpoints. The entry assessment, at the beginning of the introduction, is the starting point: it should be answered before studying the unit, without consulting anything, noting the lessons to which the errors refer, which are the ones that call for more care. The exit assessment, in the synthesis and before the challenges, is the contrast: it is answered after finishing the lessons, also without consulting, and is compared with the entry assessment to see what changed and which lessons should be reviewed. In both, the first attempt is what counts, being the one that is compared and the one that the profile of the final review gathers; later attempts are made with the feedback already seen. The challenges complete the check, because they require combining and writing out what the short questions only touch on. From this it follows that whoever believes they already master a unit should not decide it by a single test: if their exit assessment is solid and they solve the challenges of the synthesis, they may move on to the following unit; if not, it is advisable to go through the lessons that the one and the others point to.

In each lesson, it is advisable first to read the summary and the objectives, which say what is sought; then to study the theory with pencil and paper, trying to anticipate each step of the proofs before the player writes it; to attempt the solved problems before looking at their solution, and to solve the proposed ones without help, opening the hint only when the attempt has been exhausted, and the answer only at the end, to check. A problem whose answer was consulted before attempting it has not been solved, but read. In an integral calculus course, moreover, it is advisable to check every antiderivative by differentiating it and to distrust partial sums computed by a machine: they suggest that a series converges, but they do not prove it, and the harmonic series, whose partial sums grow with enormous slowness, diverges.

The challenges are harder than the problems of the lessons, and it is normal for some to require several attempts on different days. It is not advisable to dwell indefinitely on one: noting it down, continuing to advance and coming back to it later is often the shortest path. Now, the estimated workload assumes that all of them are attempted seriously, and in that effort much of what the course can teach is at stake.

Finally, it is advisable to write. Writing out a proof or a complete solution, with its premises and its conclusions, is the only way to know whether one has understood, and it also belongs to the seventh of the course objectives. A study notebook, in which the definitions and the theorems of each unit are rewritten in one’s own words, is the best review material the course can leave behind, and it will be all the more so in Calculus III, which will return to almost everything that is proved here.