Summary
This lesson opens the fourth unit of the course, devoted to the applications of the integral. The integral was defined to measure the area under a graph; this unit uses it to measure more (the area between two curves and that of a polar region, the volume of a solid, the length of a curve and its curvature) and to compute it with a bounded error when no antiderivative is known. It presents the path of the unit, whose method is always the same: settle the reasonable requirements of the magnitude, enclose it between simple pieces whose measure is known, recognize in those measures lower and upper sums and pass to the limit with the integrability criterion or with Darboux’s theorem. It reconstructs the history of these ideas, from Archimedes’ sphere and cylinder and Kepler’s wine barrels to the rectification of curves, Huygens’s cycloid and the rules of Newton, Cotes and Simpson; it formulates the problem that runs through it, that of knowing when a magnitude is the limit of those of its approximations, and shows with a staircase that approaches a diagonal that area is and length is not. It ends by pointing out the place of the unit in the course and where these applications are used in other courses of the site and in science and technology.
Learning objectives
- Describe the path of the unit and explain what each lesson measures or computes and which result of the unit on the definite integral, of Calculus I or of Algebra and Geometry it relies on.
- Explain the common method of the unit, distinguish in each case what is a definition from what is a theorem, and recognize why a magnitude is not always the limit of those of its approximations.
- Place the results of the unit in their historical context, from Archimedes and Kepler to Huygens, Cotes and Simpson, and distinguish the order in which they were discovered from the order in which they are proved.
- Point out the place of the unit in the course and where areas, volumes, lengths and numerical integration intervene in other courses and in scientific and technical applications.
Entry assessment
Before working through the unit, it is advisable to measure the starting point. This self-assessment is not graded: it serves to know where to pause. The first four questions cover, in order, the four content lessons of the unit, one each, and measure a skill (computing the area between two graphs that cross, choosing the convenient method for the volume of a solid of revolution, simplifying the integrand of a length with an identity, foreseeing how many subintervals guarantee a given error), not a statement to be recalled; the same skills are measured again at the end, in the synthesis lesson, with other data. The last five check what this unit takes as known from the unit on the definite integral, from Calculus I and from Algebra and Geometry: the limit of Riemann sums, the change of variable in the definite integral, Lagrange’s mean value theorem, the curvature of a graph and the area of a circular sector.
Before starting the unit, measure your starting point. It is a short self-assessment: it is not graded and its result is stored only in your browser.
Question 1What is the area of the region lying between the graphs of and for ?
It is the absolute value of : without splitting the interval at the crossing point, the piece where the difference is negative subtracts instead of adding, and .It is the area of the closed region between the two crossing points, on ; the requested region reaches , and on it contributes more.It is the area under the parabola on : on each piece, the ordinate of the graph that lies below still has to be subtracted.The graphs cross where , that is, at and at ; on the line lies above the parabola, and on , below it. By the corollary on the area between two graphs that cross, the area is .Question 2The region under the graph of for revolves about the axis of ordinates. What is the volume of the solid it generates?
It is the volume by disks , that of the solid the region generates when it revolves about the axis of abscissas, not about the axis of ordinates.The factor is missing: the shell of radius unrolls into a rectangle of base , the length of its circle, not .The antiderivative of is , not : when integrating by parts, .With disks one would have to solve for and integrate ; with cylindrical shells, by the theorem on the volume by cylindrical shells, from the lesson on volumes of solids, which requires a continuous and nonnegative function on , with , the volume is ; since the cosine is moreover strictly decreasing there, the theorem on the equivalence of washers and shells, from the same lesson, ensures that disks give the same number. Integration by parts gives the antiderivative , and .Review: Volumes of solids
Question 3What is the length of the graph of for ?
It is : the under the root has been forgotten. That number is less than , the horizontal advance of the curve, and no curve is shorter than the chord joining its endpoints.It is : has been integrated without the square root.The root of has been taken as ; the root of a sum is not the sum of the roots, and the identity is the one that simplifies the root.The derivative is continuous on , and , with there. By the corollary on the length of a graph, the length is , and by the theorem on the antiderivative of the secant, from the lesson on trigonometric integrals, it equals .Review: Arc length and curvature
Question 4The integral is approximated with the trapezoidal rule . The second derivative of , , is increasing and positive on , so that there. What is the smallest for which the bound of the theorem on the error of the midpoint and trapezoidal rules, with , ensures ?
It is the number given by the constant , that of the midpoint rule; that of the trapezoidal rule is , and its bound is twice as large.has been bounded by its value at , which is ; the bound must hold on the whole interval, and increases up to at .has been used instead of : the error of the trapezoidal rule decreases like the square of the spacing, and that is why a much smaller suffices.With , the bound is , and is equivalent to , which is approximately . Since and , the smallest is .Review: Numerical integration
Question 5From earlier unitsWhat is the limit of as ?
It is the limit of : on each subinterval measures , not , and dividing by is still missing.Each term tends to , but their number grows: the sum of the terms is an average of values of the sine, which does not vanish. Nor do signs cancel, because sweeps half a turn, where the sine is not negative.has been divided by the integral of the sine instead of dividing the integral by it: the Riemann sum on carries the factor , and the given one is times it.The sum is the Riemann sum of the sine on with the uniform partition into subintervals and the right endpoints; the sine is continuous and, therefore, integrable, and by the corollary on Riemann sums with uniform partitions it tends to . The given sum is that same one divided by .Review: The Riemann integral
Question 6From earlier unitsWhat is the value of ?
The integrand is not negative on , so the integral cannot be: the sign of has been lost, which compensates for the reversed order of the new limits, from to .It is : the factor is missing, because is half of .It is , the area of a quarter of the disk of radius : the factor has been omitted.With , of derivative , the integrand is , and the theorem on the change of variable in the definite integral gives .Question 7From earlier unitsLet for . Is there a single in at which the two coordinates satisfy at the same time the conclusion of Lagrange’s mean value theorem, that is, and ?
At the first equation holds, but , not .At the second equation holds, but is greater than .Lagrange’s theorem is for real functions: applied to each coordinate, it gives one point for each, and nothing forces them to coincide.Lagrange’s mean value theorem applies to each coordinate separately, which is a real function, and gives one point for each: only at , and on only at . The lesson on arc length has to handle those two different points.Question 8From earlier unitsWhat is the radius of curvature of the graph of at the point ?
It is the radius of curvature at the vertex, where ; at the slope equals , and the factor enlarges it.It is the curvature , not the radius; the radius of curvature is .has been raised to the power instead of .Since and , by the definition of curvature and radius of curvature, , and the radius is its reciprocal.Question 9From earlier unitsWhat is the area of the region of the points with polar coordinates with and ?
The factor is missing: the sector is the fraction of the disk, whose area is , and .It is the length of the arc, , not the area of the sector.The angle has been measured in degrees, ; the formula requires the angle in radians.It is the circular sector of radius and central angle of radians; by the theorem on arc length and the area of the sector, its area is .
Loading the content…
Completed
Sign in to save your progress